SKU: 485054
UPC: 750408383587
Linked to MusiPos
RRP: $2199
0 - Primary Warehouse
0 - Secondary Warehouse
Chat to us or call 5444 8889
Find out more
Compact 1,200 Watt 2-Channel DSP Controlled Power Amplifier
Extraordinary flexibility, high power density and competitive cost makes IPD 1200 equally at home whether in permanent installations, portable corporate AV systems, or live PA setups.
Delivering 2 x 600 W at 4 ohms, IPD 1200 packs reliable power and performance into 1U. At the heart of the IPD platform is a latest-generation DSP engine equipped with up to a total of 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay, and both high- and low-pass filters adjustable to any frequency.
The DSP also provides extensive protection for your loudspeaker system, in the form of the innovative software-controlled Speaker Protect Limiter, configured with ease from within IntelliDrive Controller software. Harnessing all of this power is child’s play thanks to the IPD LoadLibrary, a collection of LAB GRUPPEN released presets – for quick configuration and optimization of a wide range of loudspeaker systems, both generic and popular brand models.
All setup parameters for input mixing, DSP features and limiter setting are accessible on the front panel using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available. Up to 100 user-defined presets may be stored on-board.
Most users will also want to take advantage of the advanced, Ethernet-based networked monitoring and control features. Network configuration is fast and foolproof, with automatic discovery and identification of all connected amplifiers. The sleek GUI is designed for touch-based devices, and enables quick grouping of amplifiers along with intuitive setup and preset storage of all DSP parameters.
With AES3 digital inputs standard, IPD 1200 connects directly to digital console stage boxes, or accept AES input within a fixed digital network installation, eliminating a D-A/A-D conversion cycle. Additionally, AES3 inputs can be set for automatic fail-over to analog (perfect for keeping the show going, or in case of installations – maintaining system integrity for mission-critical PA/VA system applications), and input mixing is available for all four inputs. At the power output end, connections are available on binding posts or Neutrik speakON
At the heart of IPD Series is the intuitive GUI of the IntelliDrive Controller software, giving powerful user control over just about every aspect of DSP performance on each device on the network. Available on PC and Mac, and designed with touch-screen in mind, IntelliDrive Controller gives you the edge when it comes to system tuning.
IPD Series boasts a latest-generation DSP engine equipped with up to a total of 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay, and both high- and low-pass filters adjustable to any frequency. This makes IPD Series akin to a standalone digital audio processor, with 2 pristine amplifier channels for free!
Extraordinary flexibility, extensive functionality and features, and competitive cost make IPD Series amplifiers equally at home whether in permanent installations, portable AV systems, or live monitor drive. Wherever performance and reliability cannot be compromised, yet the budget is tight, IPD Series presents a universal solution.
Number of amplifier channels 2 Max total output all channels driven 1200 W Peak output voltage per channel 50 Vrms Max. output current 16 Arms
2 ohms 500 W 4 ohms 600 W 8 ohms 300 W 16 ohms 150 W
THD 20 Hz - 20 kHz at 1 W <0.1% THD at 1 kHz and 1 dB below clipping <0.05% Signal to Noise Ratio >102 dBA Channel separation (Crosstalk) at 1 kHz >80 dB Frequency Response 2 Hz – 42 kHz Input impedance 18 kOhm Common Mode Rejection (CMR) 50 dB Output impedance 25 mOhm
SCVPL 70 V peak Sensitivity for full power 6 dBu Gain (all DSP controls set to 0 dB) 30.2 dB Level adjustment (per channel) Software controlled from -inf to 0 dB
Analog input connectors (per ch.) Neutrik XLR, 3pin female Analog input link connectors (per ch.) Neutrik XLR, 3pin male AES input connectors (per ch.) Neutrik XLR, 3pin female AES input link connectors (per ch.) Neutrik XLR, 3pin male Output connectors (per ch.) Neutrik speakON / binding post Buttons Power, Menu, Back, Mute (per ch.), Power Encoder Adjust / Set Cooling Single fan, front to rear airflow, no filter required, temperature controlled speed
Nominal voltage 100 – 240 VAC Operating voltage 60 – 265 V AC Standby consumption <6.5 W Mains connector IEC inlet
Dimensions (Rack rail to rear panel) W: 483 mm (19”), H: 44 mm (1 U), D: 272 mm (10.7”) Dimensions (Overall incl. handles and rear support) W: 483 mm (19”), H: 44 mm (1 U), D: 344 mm (13.5”)
Finish Black anodized aluminum front and black / gray steel chassis
Please Note: This item may be on display at the Mooloolaba Music Shop and may have been available for demonstration to in store patrons. We take careful and meticulous care, boxing and cleaning of your product before the shipping or selling of an item. If you do want photos before making a purchase please call our shop where one of our staff can assist in sending more detailed images.
Mooloolaba Music reserves the right to cancel, at any time before delivery and for whatever reason, an Order that it has previously accepted. Mooloolaba Music may do this for example, but without limitation, where:
a) Mooloolaba Music's suppliers are unable to supply Goods that they have previously promised to supply (b) an event beyond Mooloolaba Music's control, such as storm, fire, flood, earthquake, terrorism, power failure, war, strike or failure of computer systems, means that Mooloolaba Music is unable to supply the Goods within a reasonable time (c) Goods ordered were subject to an error on the Website, for example, in relation to a description, price or image, which was not discovered prior to the Order being accepted; (d) The products shown in the images above product may differ to the purchased product. Changes could include, different stands, treatments, slight variations in colour, In-built batteries and charging ports. Please contact our team for further clarification.
We ask that you research parts carefully before buying. Purchase of any non-licenced part as a replacement spare part is at your own risk. Some branded replacement parts also require professional installation to fit correctly. If in doubt we will be happy to advise further and confirm suitability before purchase.
Click and collect: is available if the product is available in store.
Means the item is physically in the shop and can be bought and shipped or collected at our store.
This item is currently not available physically in our store but can be ordered in from a supplier
Item is available from our supplier. This is an item we do not have available in the store. Please note that there are longer delivery times if you decide to purchase.
Item is available and ready to ship from our store.
Item is in high demand