Radial ProD2 Passive Stereo Direct Or DI Box With Eclipse ET-DB2 Transformers RA-PROD2 $ 309 $379.00
How to get it Learn More
Store Click & Collect - Available In Stock
Online In Stock
Talk to a specialist

Chat to us or call 5444 8889

Seen a better price?

Find out more

Description

Radial ProD2 Passive Stereo Direct Or DI Box With Eclipse ET-DB2 Transformers

  • Stereo direct box designed for keyboards
  • Smooth, warm sound rounds out digital edge
  • Able to handle huge transients without choking
  • May be rack mounted for touring rigs

The Radial ProD2 is a compact stereo direct box developed specifically to address the needs and challenges of interfacing a stereo keyboard to a professional audio system. This passive DI features two independent channels with separate inputs and thru-puts for the artist's stage amp and two fully isolated outputs for the PA system.

At the heart of the design are two high performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops.

As with all Radial products, the ProD2 is built tough to handle the rigors of professional touring. A 14-gauge steel ultra rigid i-beam skeleton frame eliminates opportunity from outside stress to flex the sensitive PC board and cause premature solder joint failure. The innovative book-end design creates a protective zone around the connectors and switches further increasing lifespan. And a full bottom no-slip pad adds mechanical isolation and electrical insulation to further reduce opportunity for noise.

The Radial ProD2's warm sound, legendary build quality and compact design have made it the most popular stereo direct box made today.

ProD2 with Stereo Keyboard

The ProD2 is designed for stereo devices like keyboards. Simple, straight ahead hookup makes it easy to connect your keys to your recording system for great stereo sound!

ProD2 with Drums & Samplers

Driving the output from a sampler or electronic drum machine to the PA system has never been easier. The ProD2 delivers plenty of headroom and lets you connect a local DJ mixer too.

ProD2 with Instruments

Two Radial ProDI direct boxes in one, multi instrumentalists rejoice! The ProD2 is perfectly well suited for bass, acoustic guitar or just about any instrument with a pickup.

ProD2 as a splitter

Take the mono output from your keyboard and patch it into Ch 1, use the THRU on Ch 1 to send a split signal to Ch 2. Voila! Two isolated mic level outputs to send to FOH and Monitors!

Specifications

The ProD2 is a high-quality ultra-compact stereo passive direct box that features custom-made Radial transformers. Essentially two ProDIs in one compact enclosure the ProD2 is a great choice for stereo keyboards, DJ equipment and consumer hi-fi systems. Its high-performance transformer has an exceptionally linear frequency response from 20Hz to 18kHz and is able to handle high signal levels without saturation making it ideal for electronic instruments. The ProD2 is housed in an extremely rugged two piece 14 gauge steel enclosure with a book-end designed outer shell that prevents damage to the switches, features a -15dB PAD for high output sources and ground lift switch to troubleshoot noise from ground loops.

 

Radial ProD2 Block Diagram
Specifications    RADIAL ProDI
Audio circuit type:  Passive, transformer based
Number of channels: Single channel (mono)
Frequency response:  20Hz ~ 18.5KHz (± 0.2dB)  
Dynamic range:  128dB 
Maximum input:  +18dB @ 20Hz 
Total harmonic distortion:  0.01% from 20Hz~20kHz @-10dB
Phase deviation:  1° @ 100Hz; 8° @ 20Hz 
Input impedance:  140k Ohms, unbalanced 
Output impedance:  150 Ohms, balanced 
   
Features     
Transformer: Eclipse ET-DB2, 12:1 ratio
Shield: Faraday, MuMETAL® can
Input pad:  -15dB  
180° polarity reverse:  Inverts absolute phase
Ground lift:  Disconnects pin-1 at XLR output 
XLR configuration:  AES standard (pin-2 hot) 
Connectors: 1/4" in & thru, XLR-M out
   
General     
Construction:  14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size:  (W x H x D) 70 x 108 x 44mm (2.75” x 4.25” x 1.75")
Weight:  .54kg (1.2lbs) 
Shipping size: W x H x D: 102 x 76 x 165mm (4.00" x  3.00"  x 6.50")
Shipping weight: 0.61 kg (1.35 lbs)
Power:  Passive, no power required 
Conditions: For use in dry locations only between 5°C and 40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.
Radial ProD2 Frequency Response Graph
Radial ProD2 Phase Response Graph
Radial ProD2 FFT Graph
Radial ProD2 THD+N vs. Frequency
Click to view larger graph

Features

Radial ProD2 Features

 
 

Reviews

Please Note: This item may be on display at the Mooloolaba Music Shop and may have been available for demonstration to in store patrons. We take careful and meticulous care, boxing and cleaning of your product before the shipping or selling of an item. If you do want photos before making a purchase please call our shop where one of our staff can assist in sending more detailed images.

Mooloolaba Music reserves the right to cancel, at any time before delivery and for whatever reason, an Order that it has previously accepted. Mooloolaba Music may do this for example, but without limitation, where:

a) Mooloolaba Music's suppliers are unable to supply Goods that they have previously promised to supply
(b) an event beyond Mooloolaba Music's control, such as storm, fire, flood, earthquake, terrorism, power failure, war, strike or failure of computer systems, means that Mooloolaba Music is unable to supply the Goods within a reasonable time
(c) Goods ordered were subject to an error on the Website, for example, in relation to a description, price or image, which was not discovered prior to the Order being accepted;
(d) The products shown in the images above product may differ to the purchased product. Changes could include, different stands, treatments, slight variations in colour, In-built batteries and charging ports. Please contact our team for further clarification.

We ask that you research parts carefully before buying.
Purchase of any non-licenced part as a replacement spare part is at your own risk.
Some branded replacement parts also require professional installation to fit correctly.
If in doubt we will be happy to advise further and confirm suitability before purchase.

You may also like

Other people bought

More from this category

Added to Cart! 🎉

Product main image Go to Cart

Calculate Shipping

Click and Collect:

Click and collect: is available if the product is available in store.

In Stock

Means the item is physically in the shop and can be bought and shipped or collected at our store.

Order - out of stock:

This item is currently not available physically in our store but can be ordered in from a supplier

In Stock - From Supplier:

Item is available from our supplier. This is an item we do not have available in the store. Please note that there are longer delivery times if you decide to purchase.

In Stock - Available now for delivery:

Item is available and ready to ship from our store.

Low Stock:

Item is in high demand