SKU: SEEL_T2
UPC: 850426001507
Linked to MusiPos
RRP: $949
2 - Primary Warehouse
0 - Secondary Warehouse
Chat to us or call 5444 8889
Find out more
With the T2, your transients will never be the same again. The versatility of the sE4400a's shockmount, patterns, filters and pads, plus a titanium diaphragm for the most immediate percussion, bass, guitar & vocal transients you've ever heard. This mic is the ultimate combination of solid state performance and versatility. Based on the chassis and feature spec of the acclaimed 4400a, but with the highly specialized capsule of the original sE Titan, it delivers full and perfectly balanced mid and low frequencies, while its titanium capsule produces un-hyped but ultra-detailed HF response. It is thus ideally suited for any percussive sounds - including kick & toms, the attack of a guitar or bass, hammer action of a piano, and hip-hop vocals.
The Titanium Diaphragm Unusually, the T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer than our gold-sputtered capsules, meaning quicker transient response, which is important when recording instruments that create fast transients and attack - like drums and percussion - as it enables the microphone to maintain clarity and deliver exceptionally accurate performances. The stiffness of this special diaphragm also allows it to withstand extremely high sound pressure levels, so it can handle the loudest percussion with ease.
Custom Shockmount + Chassis The T2 shares the shockmount of the 4400a. Here's what TapeOp has to say about it: "I don't think I've ever started a mic review by introducing the accessories first. But given the innovative design of the shockmount included...I can't help but get that out of the way so I can then move on to telling you what a great buy the mic itself is." - Tape Op Magazine
The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3/4" thick, it fits neatly in the palm of your hand, but is built to take a beating on the road.
Capsule Type: Hand-Crafted True Condenser
Diaphragm: 32mm Twin Titanium/Mylar
Directional Pattern: Cardioid, Hyper Cardioid, Omni, Figure-8
Frequency range: 20 Hz - 20 kHz
Impedance: 50 Ohms
Sensitivity: 25.12 mV/Pa (-32 dB)
Max SPL: 122/132/142 dB (0/-10/-20 dB pad) (0.5% THD @ 1kHz)
Signal to Noise Ratio: 78 dB
Self Noise: 16 dB(A)
Pass Filter Switch: 60/120 Hz
Preattenuation Pad: -10/-20 dB
Matching Connectors: XLR3F
Power requirement: 48V phantom
Weight: 280g / 9.88oz
Please Note: This item may be on display at the Mooloolaba Music Shop and may have been available for demonstration to in store patrons. We take careful and meticulous care, boxing and cleaning of your product before the shipping or selling of an item. If you do want photos before making a purchase please call our shop where one of our staff can assist in sending more detailed images.
Mooloolaba Music reserves the right to cancel, at any time before delivery and for whatever reason, an Order that it has previously accepted. Mooloolaba Music may do this for example, but without limitation, where:
a) Mooloolaba Music's suppliers are unable to supply Goods that they have previously promised to supply (b) an event beyond Mooloolaba Music's control, such as storm, fire, flood, earthquake, terrorism, power failure, war, strike or failure of computer systems, means that Mooloolaba Music is unable to supply the Goods within a reasonable time (c) Goods ordered were subject to an error on the Website, for example, in relation to a description, price or image, which was not discovered prior to the Order being accepted; (d) The products shown in the images above product may differ to the purchased product. Changes could include, different stands, treatments, slight variations in colour, In-built batteries and charging ports. Please contact our team for further clarification.
We ask that you research parts carefully before buying. Purchase of any non-licenced part as a replacement spare part is at your own risk. Some branded replacement parts also require professional installation to fit correctly. If in doubt we will be happy to advise further and confirm suitability before purchase.
Click and collect: is available if the product is available in store.
Means the item is physically in the shop and can be bought and shipped or collected at our store.
This item is currently not available physically in our store but can be ordered in from a supplier
Item is available from our supplier. This is an item we do not have available in the store. Please note that there are longer delivery times if you decide to purchase.
Item is available and ready to ship from our store.
Item is in high demand